manualshive.com logo in svg

sensl HRM-TDC, Руководство пользователя, Страница: 33 / 85

Поделиться
Скачать
sensl HRM-TDC Скачать руководство пользователя страница 33

SensL © 2011

33

USER MANUAL

HRM-TDC

 

SensL © 2011

33

  >  Appendix   >  Hrm-tdc Registers And Low Level Dll Functions

This function initializes an array of HRM-TDC handles to allow communication with all HRM-TDC modules present 
on the USB bus. The size of the array must be greater or equal to the number of modules detected using the function 
HRM_GetConnectedModuleCount.

Driver - HRM_CloseModule

HRM_STATUS WINAPI HRM_CloseModule(HANDLE handle)

On completion of the application, this function must be called to release the handle and close the session.

Example:

 

int

  

moduleCount;

 

HANDLE

 handleArr[20];

HRM_RefreshConnectedModuleList(); 
moduleCount = HRM_GetConnectedModuleCount();   
 

if

(moduleCount)

 {
HRM_GetConnectedModuleList(handleArr);

APPLICATION CODE HERE

HRM_CloseModule(handleArr);
}

else

    printf(“No HRM-TDC modules detected”); 

In this example the

 

APPLICATION CODE

 can address up to

 ‘moduleCount’

 HRM-TDC modules.

Now that communication with the module has been established the configuration registers can be programmed 

using the associated low level driver.

ARR – Address Route Register

Register Description

The method of time-binning is based on using the received time-tag data and discrete I/O inputs to form the address 
in memory for time-bin processing. In its simplest form, a time-tag could be used as the address bus so that each 

time-bin is separated by the resolution of the least significant bit. On receipt of a time-tag the system outputs the 

time-tag as an address and then increments that location (time-bin). In the HRM-TDC system further data bits are 
included in the address selection to allow multiple curve plotting based on multiple channel inputs and discrete 

inputs for X, Y array plotting. To allow maximum flexibility the AAR register can define any bit to be placed in any 

Содержание HRM-TDC






















































































Отзывы:

Нет отзывов