furniture lighting solutions
1 x DUAL VOLTAGE SHAVER SOCKET CHROME
Installation
1) This shaver supply unit is suitable for surface mounting, using a 49mm 2 gang surface back box or flush mounting using a
47mm 2 gang metal back box.
2)
Re move and retain the 2 fixing screws located at the back of the fascia plate.
3)
Feed supply cable through the appropriate knockout installation box. In the case of a metal back box fit a 20mm rubber
grommet.
4)
Strip outer sheath of the supply cable to suitable length and then remove 10mm �
f..
the insulation from the Live (brown or
red) and Neutral (blue or black) conductors to expose inner cores.
U
5)
Insert neutral (blue or black) conductor into the terminal marked N and fully tighten the screw.
6) Insert live (brown or red) conductor into the terminal marked L and fully tighten the screw.
7)
Insert the earth conductor, ensuring it has been sleeved with green/yellow sleeving, into the terminal marked @
8)
Ensure that an additional earth cable is connected between the shaver supply unit earth terminal and the earth terminal in
the back box being used.
9)
Fit socket to back box with the 2 fixing screws provided.
10)
Re-fit the supply fuse (if removed) for isolation and switch supply back on.
Select voltage required
115/230V
b
y inserting shaver plug into the appropriate socket.
Always unplug appliance after use.
Wir
i
ng Diagram
L
N
E
.._
______________________
_.�
Blue Black
Brown/Red
Maintenance & Care
• Ensure that the power is disconnected prior to cleaning.
• To keep the finish of this product, wipe over with soft cloth periodically.
• Do not use harsh chemical solvents, it may dis-colour or damage the finish.
Sensio House, Unit 7 Speedwell Road, Castleford, West Yorkshire, WFlO SPY.
www.sensio.co.uk
Earth Cable must
be sleeved using
Green/Yellow
sleeving.
Technical drawings for illustration purposes only, Sensio has the right to change any information
without prior notice. Make sure you check all hole cut outs before work commences.
furniture lighting solutions
