©2018 Sensing-labs
1
Sensing Labs SenlabA 4MA-LAB-
xx
NS
–
User guide
–
Version 2
–
REV D
Warning, take care to respect the operating temperature of the senlab:
-20°C to +70°C for outdoor and 0°C to +55°C for indoor version
Thank you for your choosing our Senlab product!
We hope you will find the instructions on this user manual clear and easy to follow.
General overview
The Senlab Analog (SenlabA) sensor
is a smart LoRaWAN™ radio device
with an
analog 4-20mA input.
The SenlabA product is intented to be connected to
any sensors with 4-20mA
output
, to it 50cm free ended cable.
Any question about your sensor compatibility? Please contact your distributor.
Part number
Casing
type
Protection
level
Dimension
4MA-LAB-13NS
Outdoor
IP67
102x56x35mm
4MA-LAB-41NS
Indoor v2
IP30
91.5x50x25mm
3 steps are required to make your SenlabA fully operational, described below.
Warning, the 4-20mA current loop must be powered by an external power supply,
or by the sensor (transmitter).
The SenlabA is only passive current sensor, it doesn't provide power for the loop.
Provisioning
of the device
On-site
installation
Activation of
the device
Outdoor
Indoor v2
4-20mA
