©2018 Sensing-labs
2
Sensing Labs SenlabA 4MA-LAB-
xx
NS
–
User guide
–
Version 2
–
REV D
Provisioning of the device
You have to be sure that your
Senlab device has been well commissioned
to be able to
reach your LoRaWAN network.
✓
Contact if needed your distributor to get your Senlab configuration
✓
Required information for provisioning the device into your LoRa system are listed in
the following table:
* = If asked when ordering, devices are already provisioned into your SLgateway.
If not, you need these parameters.
➢
Important:
Applicative configuration of Senlab device can be done:
-
At factory (for minimal batch of 1000 devices)
-
By your distributor (more often)
-
By yourself (if you have your own SLsetting tool)
➢
In all cases, you have to refer to parameter list
described into the Application
features chapter to fit to your use case and get a “Plug&Play” device.
➢
Application configuration can also be dynamically
adjusted Over The Air
.
Warning, don’t unprovision device from your system before stopping it!
(refer application features to stop the application via RF)
devEUI
appEUI
appKey
appSkey
NwkSkey
netId
devAddres
s
Case 1 : OTAA / PUBLIC
Typical configuration for Network
Operator based architecture
X
required
required
Case 2 : ABP / PUBLIC
Typical configuration for Private
mono gateway network
X
required
required
required
Case 3 : ABP / PUBLIC
Sensing-Labs SLgateway V2
configuration (local network)
X
Optional*
Optional*
Optional*
Optional* Optional*
