Sensica Sensilight PRO, Руководство пользователя

Страница: 9 / 128

9
Englis
h
User interface description
1. ON/OFF button – Pressing
the button will turn the
device ON at energy
level 1. The device will
switch to standby mode
when left unattended for
5 minutes or by pressing
the ON/OFF button for 3
consecutive seconds.
2. Energy recommendation
button – A press on the
button will allow you to
detect the recommended
energy level for your
treatment, according to
your skin tone in the tested
area. When pressing the
skin tone detection button,
it will light up green and
all energy level display
indicators will flicker. Hold
the device on the desired
treatment area and press
the trigger button to
measure your skin tone (no
flash will be released). The
recommended energy level
according to your skin tone
at the treatment area will
be automatically set, as
indicated by the energy
level display. Failure to
determine suitable energy
level due to lack of contact
or not allowed skin tone
(too dark), is indicated by
a momentary red light on
the status indicator. Note
that the recommended
energy level is set only
through this procedure
and it does not occur
automatically. To test the
skin tone in each treatment
area, place the device on
that area and press the
energy recommendation
button. Performing a
preliminary test in the
desired treatment area is
still needed and selection
of energy level should be
according to your own
comfort, as determined
by the preliminary test.
3. Energy level selection
buttons – The + (increase
energy level) and –
(decrease energy level)
buttons, allow you to
choose between 6 different
levels. Select the energy
level according to what you
found most comfortable
in the preliminary test.
You can use the energy
recommendation button
to assist in choosing the
optimal energy level for
you for each desired
treatment area.