Sensica Sensilight PRO, Руководство пользователя

Страница: 19 / 128

19
Englis
h
Post-treatment care
• After treatment, you may
use a calming lotion.
• Avoid using peeling and
bleaching creams or
similar products for at
least 24 hours, as this
irritates the treated skin.
• Avoid direct sun exposure
for at least 2 weeks post
treatment. If exposing
recently treated skin to
sunlight during this time
period, apply sunscreen
of SPF 30 or higher.
Cleaning & Storage
1. Make sure to turn off
the device before
cleaning and storage.
2. It is recommended that
the treatment window
area be cleaned after
every session by using
a dry and clean cloth.
3. Fully charge the device
every 6 months, even if
you have not used it in
that time.
4. If there is dirt or debris on
the treatment window,
clean the treatment
window. If you can't get
the device clean, contact
our Customer Service.
Troubleshooting
If the device does not turn on:
• Make sure that the device
is charged (as indicated
by the green light at the
battery status indicator).
If the device does not
trigger a pulse:
• Verify there is full contact
between the device and
your skin. The trigger button
will activate a pulse only
when the device is in full
contact with the skin.
• Verify that the treatment
window is properly attached
to your device (the device
will not be operable if the
treatment window is not
attached or not properly
attached to the device).
• Verify that the area you are
trying to treat is not too
small, curved or bony. The
entire treatment window
should touch the treatment
area. Pulling the skin flat
can help to achieve this.