background image

2.2 Touch Screen 

2.2.1 Five Wire Resistive Touch Screen 

The touch screen is a 5 wire analog resistive, mounted on a chemically 

strengthened backing glass, with a resolution of 4096 x 4096 touch points. The 

ROBOT/SHOP/SCAN POS 3/4/6 is designed so that the application accepts 

all user input via the touch screen. Drivers are provided which allow the touch 

screen to emulate mouse operation, therefore most mouse driven applications 

will accept input from the touch screen. 

 

2.2.2 Infrared Touch Screen 

The touch screen is an anti-scratch IR touch, mounted on a chemically 

strengthened backing glass, with a resolution of 51 x 38 touch points. The 

ROBOT/SHOP/SCAN POS 5/7 is designed so that the application accepts all 

user input via the touch screen. Drivers are provided which allow the touch 

screen to emulate mouse operation; therefore most mouse driven applications 

will accept input from the touch screen. 

 

2.3 Removable Hard Disk Drive 

2.3.1 HDD - located at the left side of panel 

The removable hard disk is located left side of panel. Pull out HDD from HDD 

cover.   

 

 

 

 

12

Содержание ROBOT POS




























Отзывы: