background image

Important safety instructions

Important safety instructions

• Read this instruction manual.

• Keep this instruction manual. Always include this instruction manual

when passing the device on to third parties.

• Heed all warnings and follow all instructions.

• Clean the device only with a slightly damp cloth.

• Do not place the device near any heat sources such as radiators, stoves,

or other devices (including amplifiers) that produce heat.

• Only use attachments/accessories specified by Sennheiser. 

• When replacement parts are required, only use replacement parts

specified by Sennheiser or those having the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.

• Refer all servicing to qualified service personnel.

Servicing is required if the device has been damaged in any way, liquid
has been spilled, objects have fallen inside, the device has been exposed
to rain or moisture, does not operate properly or has been dropped.

• WARNING: To reduce the risk of short circuits, do not use the device near

water and do not expose it to rain or moisture.

Intended use

Intended use of the ew 100 G3 series devices includes:

• having read these instructions especially the chapter “Important safety

instructions”,

• using the devices within the operating conditions and limitations

described in this instruction manual.

“Improper use” means using the devices other than as described in these
instructions, or under operating conditions which differ from those
described herein.

SKP100_529675_0409_Sp9.book  Seite 2  Donnerstag, 9. April 2009  1:48 13

Содержание G3 100 Series

























Отзывы: