Sennheiser EM 300 G3, Руководство пользователя

Страница: 17 / 27

17
Adjusting settings via the operating menu
Adjusting settings via the operating menu
The main menu “ Menu ”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to 60 dB, adjustable in steps of 3 dB
The transmitter’s audio level display “ AF ”
햲
always indicates the audio
level, even if the bodypack transmitter is muted, e.g. allowing you to check
the adjusted sensitivity before live operation.
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
When you are in the “ Frequency Preset ” menu item, the RF signal is
deactivated.
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the body-
pack transmitter. For more information, refer to the instruction
manual of the receiver. The relevant information is marked with
the sync icon.
For more detailed information on the operating menu, visit the
SK 300 G3 product page at www.sennheiser.com.
Input sensitivity
adjusted...
Effect/display
... too high Close talking distances, speakers with loud voices
or loud music passages cause overmodulation in
the transmission link. The yellow
AF PEAK LED
쐂
lights up. The audio level display “ AF ”
햲
shows
full deflection for the duration of the over-
modulation.
... correctly The audio level display “ AF ”
햲
shows full
deflection only during the loudest passages.
... too low The transmission link is undermodulated. This
results in a signal with high background noise.
Transmission situation Sensitivity setting
Loud music/vocals 30 to 21 dB
Presentations 21 to 0 dB
Menu
–12 dB
S e n s i t i v i t y – 12 dB
S e n s i t i v i t y
–36 dB
S e n s i t i v i t y
“Stored”
Call up
“Sensitivity” Select the desired
setting Store the setting
SET
SET
쐂 MHz 543.200
B.Ch: 20.12
MUTE
P
AF
햲
Menu
B.Ch: 5.14
Frequency Preset B.Ch:
MHz
Frequency Preset
5 .14 B.Ch:
MHz
Frequency Preset
1. 14
Call up “Frequency
Preset” Select the
frequency bank
and confirm Select the channel;
store the setting
“Stored”
SET
SET
SET
ew G3 SK 300_529670_0109_SP8_PRT.book Seite 17 Donnerstag, 5. Februar 2009 10:26 10