background image

4

The EK 2000 IEM diversity receiver

The EK 2000 IEM diversity receiver

This diversity receiver is part of the 2000 series. With this series,
Sennheiser offers high-quality state-of-the-art RF transmission systems
with a high level of operational reliability and ease of use. Transmitters
and receivers are designed for monitoring applications and permit wireless
transmission with studio-quality sound.

Features of the 2000 series:

• Optimized PLL synthesizer and microprocessor technology 

HDX

 noise reduction system 

• Adaptive diversity technology

• Switching bandwidth of up to 75 MHz

• Scan function (Easy Setup) for scanning the frequency banks for unused

channels

• Adjustable and switchable limiter

Adaptive diversity

This diversity receiver uses the ground connection of the earphones cable
as its second antenna to provide improved reception.

Areas of application

The receiver can be combined with the SR 2000 IEM and SR 2050 IEM
transmitters.

Diversity receiver

Earphones

Transmitters

EK 2000 IEM

IE 4

SR 2000 IEM

SR 2050 IEM

Stereo Transmitter SR 2000 IEM

PEAK

-10

0

-20
-30
-40

PEAK

-10

0

-20
-30
-40

AF I AF II

516.000

B.Ch:      1    1            

EQ

Standard    -18dB

 MHz

**2000**

Stereo Transmitter SR 2050 IEM

PEAK

-10

0

-20
-30
-40

PEAK

-10

0

-20
-30
-40

AF I AF II

516.000

B.Ch:      1    1            

EQ

Standard    -18dB

 MHz

PEAK

-10

0

-20
-30
-40

PEAK

-10

0

-20
-30
-40

AF I AF II

516.000

B.Ch:      1    1            

EQ

Standard    -18dB

 MHz

**2050**

**2050**

Содержание EK 2000 IEM










































Отзывы: