30
Cleaning the diversity receiver
Using freely selectable receiving frequencies
You can also freely select the receiving frequencies and store these
frequencies in the frequency banks “
U1
” to “
U6
”.
왘
Set each diversity receiver to the same frequency bank (“
U1
” to “
U6
”).
왘
On one of the receivers, select a channel within this frequency bank and
assign this channel a receiving frequency (see page 25).
왘
Synchronize a transmitter with this receiver (see the instruction
manual of the transmitter).
OR:
왘
Manually set the transmitter to the same frequency bank and channel
that you set on the receiver.
왘
Repeat for the remaining transmitters and receivers as described
above.
Cleaning the diversity receiver
왘
Use a cloth to clean the diversity receiver from time to time.
It might be that the freely selected frequencies are not inter-
modulation-free
If you are using frequencies from the frequency banks “
U1
” to
“
U6
”, it might be that the receiving frequencies are not intermod-
ulation-free.
왘
Contact your Sennheiser partner who will be pleased to
calculate intermodulation-free frequencies for you (see
www.sennheiser.com).
CAUTION!
Liquids can damage the electronics of the receiver!
Liquids entering the housing of the device can cause a
short-circuit and damage the electronics.
왘
Keep all liquids away from the receiver.
왘
Do not use any solvents or cleansing agents.
