Sennheiser Comfort calls, Инструкция по эксплуатации

Страница: 18 / 45

17
Putting the headset system into operation
Labeling the headset
The name plate or allows you to label the headset.
왘
Change the lettering of the name plate.
Swapping the assignment of the AUDIO button
The assignment of the AUDIO button can be swapped depending on
whether you wear the headset on the right or left ear. By default, the
headset is configured for wearing on the right ear. Pushing the AUDIO
button
upwards increases the volume, pushing it downwards reduces
the volume (see page 29).
To swap the assignment of the AUDIO button :
왘
Simultaneously press and hold the headset’s LINK button and
AUDIO button for 5 seconds.
The HEADSET LED flashes blue/red.
왘
Push the AUDIO button in the direction in which you want to
increase the volume until the HEADSET LED goes off.
The headset switches to standby mode.
Testing the headset system in Phone mode and
adjusting it
Testing the telephone connection
When PC mode is selected (the LED of the PC button lights up white):
왘
Press the PHONE button
쐋
on the base station.
The base station is set to Phone mode and the LED of the PHONE button
쐋
lights up white.
2
A
The “Nameplate-template.pdf” PDF file included on the CD ROM
allows you to create and print individual name plates.
5 s
Left
Right
5
4
3