11
Putting the headset system into operation
Connecting the base station to the mains power supply
왘
Connect the DC IN connector
of the power supply unit to the
DC IN
socket
왘
into a wall socket.
The LINK LED
lights up red. The LED of the last used mode button
or PC
) lights up white.
Connecting the base station to a fixed line phone
If your telephone features a headset socket for connecting the electronic
call control, please use this socket.
To connect the base station to a fixed line phone, choose one of the follow
options:
왘
Choose your connection possibility and proceed as described under
,
,
or
on the following pages.
The base station is ready for operation as soon as it is connected to
the mains power supply.
When using the headset system only in
PC
mode, the power from
the PC via the USB cable is sufficient to power the base station. For
charging the rechargeable battery within the specified charging
times (see page 22) and for use in
Phone
mode, the power supply
unit is required.
Possibility
Connection
to a fixed line phone
without
headset socket
to a fixed line phone
with
headset socket
of an optional mechanical handset lifter
(with connection possibilities
and
only)
to an optional electronic hook switch control (EHS)
For additional information on the individual settings for the
headset system via the DIP switch row
, refer to page 20.
A
B
C
A
B
D
A
B C
D
