13
Using the ACA 1
Passive Antennas,
(third party)
Setting the ACA 1 to standby mode
!
Press the
STANDBY
button
!
for approx. 2 seconds.
!
The operation indicator
%
and the LEDs
" #
go off. The
ACA 1 switches to standby mode. Connected active
antennas or boosters which are receiving their power from
the ACA 1 are switched off.
Disconnecting the ACA 1 from the mains
The
STANDBY
button
!
does
not
disconnect the ACA 1 from
the mains. To disconnect the ACA 1 from the mains:
Some types of third party passive antennas are a short
circuit at DC by design. When this type of antenna is
used the DC supply to the according inputs should be
switched OFF. If in doubt please check with the antenna
manufacturer.
&
'
&
'
