Sennetech SCT-1041, Руководство пользователя

Страница: 8 / 10

8
If SW3-4 is OFF, Pre-positions [1~69] are converted directly to the equivalent Diamond com-
mands.
Higher Pre-positions are converted according to the following table.
Vicon
Recall #
[70] to [85]
[94]
[95]
[96]
[97]
Vicon
Store #
[94]
[95]
[96]
[97]
Diamond
Command
Set Global Auto Iris On
Set Individual Auto Iris On
Set Camera ID Display On
Set Azimuth Display On
Diamond
Command
Run Vectorscan 0 to 15
Set Global Auto Iris Off
Set Individual Auto Iris Off
Set Camera ID Display Off
Set Azimuth Display Off
Vicon
Recall #
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
Diamond
Command
Escape - Used in some menus to abort, back up one step, or exit
Initialize Dome / Find Home Position
Display Goto Preshot Menu
Display List Preshots Menu / Next page
Display Program Preshot Menu
Display Run Vectorscan Once Menu
Display Run Vectorscan Continuously Menu
Display List Vectorscan Files Menu / Next page
Display List Vectorscan File contents Menu / Next page
Display Program Vectorscan Files Menu
Display List Sectors Menu
Display Program Sector IDs Menu
Display Main Menu
Diamond On-screen Programming Menus.
To activate the Diamond on-screen menus, first press the Vicon [L/S] (Lens Speed) key, and then
follow with the appropriate recall preset number. The [L/S] key must be pressed each time, or a
standard Diamond Goto Preshot command will be sent instead.
Use the ASCII CONVERSION TABLE on the next page to send numbers and characters.
OPERATION WITH SW3-4 OFF