SENKO P 10 AIR Скачать руководство пользователя страница 31

Страница: 31 / 72

SENKO pellet AIR stoves

–

Instruction manual

Useful information

for understanding the functioning of the control panel:



Backlight of the control panel screen turns off after approximately

30 seconds unless any key is pressed. To turn on the backlight

again, press any key on the control panel.



The display always shows the stove operating status (ON, OFF,

IGNITION, SHUT DOWN

…) which indicates the currently activated

settings (CHRONO, SLEEP

, AUTO, ECO…).



By pressing any of the 4 keys around the screen (1 2 3 4) you are

accessing the menu in which you can alter the operational

parameters of the stove (heating power

– FIRE, ventilator speed –

FAN, room heating temperature

– TEMPERATURE, manual or

automatic mode

– MANU / AUTO, etc.). Each of these 4 keys has

its assigned function, i.e. they directly refer to words displayed on

the screen in the immediate vicinity of each of these keys (e.g. the

word in the lower left corner refers to key 2).



When changing the heating power it is important to note that

the ascending power changes with a lag of 1 minute, while the

descending power changes with a delay of 4 minutes.



Should you, during alteration of a parameter in any menu, fail to

confirm the change by pressing key 3, and leave the key inactive

for 10 seconds, START display appears and the change is NOT

saved.



Should you, in any menu, shortly press key 5 (on/off), START

display will automatically appear on your screen (display of stove

operating status) without saving any changes not confirmed by

„OK“ key.

Содержание P 10 AIR









































































Результаты поиска

Содержание P 10 AIR

Отзывы:

SENKO P 10 AIR, Инструкция по эксплуатации, Страница: 31 / 72

Результаты поиска

Содержание P 10 AIR

Отзывы: