Senix BL4QL-L, Руководство оператора

Страница: 4 / 20

4 WWW.SENIXTOOLS.COM
SAFETY
do the job. Do not run the unit at high speed when not in
use.
• Do not force the unit. It will do a better, safer job when
used at the intended rate.
• Always stop the unit when operation is delayed or when
walking from one location to another.
• Before setting the unit down, always make sure the
engine is off and all moving parts have stopped.
• If you strike or become entangled with a foreign object,
stop the unit immediately and check for damage. Do
not operate the unit before repairing damage. Do not
operate the unit with loose or damaged parts.
• Turn the engine off and disconnect the spark plug for
maintenance or repair.
• Use only original equipment manufacturer (OEM)
replacement parts and accessories for this unit. Use
of any other parts or accessories could lead to serious
injury to the user, or damage to the unit, and void the
warranty.
• Keep the unit clean. Carefully remove vegetation and
other debris that could block moving parts.
• To reduce fire hazard, replace a faulty muffler and spark
arrestor. Keep the engine and muffler free from grass,
leaves, excessive grease or carbon build up.
• If the unit starts to vibrate abnormally, stop the
unit immediately. Inspect the unit for the cause of the
vibration. Vibration is generally an indicator of trouble.
BLOWER SAFETY
• Do not insert anything into the air openings, blower
tube or nozzle. Do not operate the unit if any of the air
openings or tubes are blocked. Keep the air openings
free from dust, lint, hair and anything else that may
reduce airflow.
• Do not operate the unit without the blower tube securely
attached.
• Do not use the unit to spray liquids, especially
flammable or combustible liquids, such as gasoline. Do
not use the unit in areas where such liquids are present.
• Do not use the unit for spreading chemicals, fertilizer or
any other substance that may contain toxic materials.
• Do not set the unit down on any surface while the unit is
running. Debris can be picked up by the air intake and
thrown out the discharge opening, resulting in damage
to the unit or property or causing serious injury to
bystanders or the operator.
• During operation, never point the unit in the direction of
people, animals, windows or automobiles. Always direct
blowing debris away from people, animals, windows or
automobiles.
• Use extra caution when blowing debris near solid
objects, such as trees, walls, fences, etc. When
possible, blow away from such objects, not toward them.
• Take care when working near valuable plants. The force
of the blown air could damage tender plants.
• Never attempt to clear a clogged air intake opening
while the unit is running.
• Keep hair, fingers and all other body parts away from
moving parts and openings.
OTHER SAFETY WARNINGS
• Maintain the unit with care.
• All service, other than the maintenance procedures
described in this manual, should be performed by a
Sears or other qualified service dealer.
• Never remove, modify or make inoperative any safety
device furnished with the unit.
• Before inspecting, servicing, cleaning, storing,
transporting or replacing any parts on the unit:
1.
Stop the unit.
2. Make sure all moving parts have stopped.
3. Allow the unit to cool.
4. Disconnect the spark plug wire.
• Secure the unit while transporting.
• Never store the unit with fuel in the tank, inside a
building where fumes may reach an open flame (pilot
lights, etc.) or sparks (switches, electrical motors, etc.).
• Store the unit in a dry place, secured or at a height to
prevent unauthorized use or damage. Keep the unit out
of the reach of children.
• Never douse or squirt the unit with water or any
other liquid.
• Keep handles dry and clean (free from debris, oil and
grease).
• Clean the unit after each use. Refer to Cleaning and
Storage. Do not use solvents or strong detergents.
• Keep these instructions. Refer to them often and use
them to instruct other users. If you loan this unit to
others, also loan them these instructions.
SAVE THESE INSTRUCTIONS