Senix BL4QL-L, Руководство оператора

Страница: 3 / 20

3 WWW.SENIXTOOLS.COM
SAFETY
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE OPERATING
WARNING:
When using the unit, all
safety instructions must be followed. Please read these
instructions before operating the unit in order to ensure
the safety of the operator and any bystanders. Please
keep these instructions for later use.
• Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
• Do not operate this unit when tired, ill or under the
influence of alcohol, drugs or medication.
• Never allow children to operate the unit. Teens must
be trained, accompanied and supervised by an adult.
Never allow adults to operate the unit without proper
instruction.
• All guards and safety attachments must be installed
properly before operating the unit.
• Inspect the unit before use. Replace damaged parts.
Check for fuel leaks. Make sure all fasteners are in
place and secure. Replace parts that are cracked,
chipped, or damaged in any way. Do not operate the
unit with loose or damaged parts.
• Be aware of risk of injury to the head, hands and feet.
• Carefully inspect the area before starting the unit.
Remove rocks, broken glass, nails, wire, string and
other objects that may be thrown or become entangled
with the unit.
• Clear the area of children, bystanders and pets; keep
them outside a 50-foot (15 m) radius, at a minimum.
Even then, they are still at risk from thrown objects.
Encourage bystanders to wear eye protection. If you are
approached, stop the unit immediately.
• Squeeze the throttle control and check that it returns
automatically to the idle position. Make all adjustments
or repairs before using the unit.
• Do not change the engine governor settings or
overspeed the engine.
• This unit is intended for occasional, household
use only.
SAFETY WARNINGS FOR GAS UNITS
WARNING:
Gasoline is highly
flammable and its vapors can explode if ignited. Take the
following precautions:
• Store fuel only in containers specifically designed and
approved for the storage of such materials.
• Always stop the engine and allow it to cool before filling
the tank. Never remove the fuel tank cap or add fuel
when the engine is hot. Always loosen the fuel tank cap
slowly to relieve any pressure in the tank
before fueling.
• Always add fuel in a clean, well-ventilated outdoor area
where there are no sparks or flames. DO NOT smoke.
• Never operate the unit without the fuel cap securely
in place.
• Avoid creating a source of ignition for spilled fuel. Wipe
up any spilled fuel from the unit immediately, before
starting the unit. Move the unit at least 30 ft. (9.1 m)
from the fueling source and site before starting the
engine. DO NOT smoke.
• Never start or run the unit inside a closed room or
building. Breathing exhaust fumes can kill. Operate this
unit only in a wellventilated outdoor area.
WHILE OPERATING
• Wear safety glasses or goggles that meet current ANSI
/ ISEA Z87.1 standards and are marked as such. Wear
ear/hearing protection when operating this unit. Wear a
face mask or dust mask if the operation is dusty.
• Wear heavy long pants, boots, gloves and a long sleeve
shirt. Do not wear loose clothing, jewelry, short pants,
sandals or go barefoot. Secure hair above shoulder
level.
• Use the unit only in daylight or good artificial light.
• Avoid accidental starting. Be in the starting position
whenever pulling the starter rope. The operator and
unit must be in a stable position while starting. Refer to
Starting and Stopping.
• Use the right tool. Only use this tool for its
intended purpose.
• Always hold the unit with both hands when operating.
Keep a firm grip on both handles or grips.
• Do not overreach. Always keep proper footing and
balance. Take extra care when working on stairs,
steep slopes or inclines. To avoid serious injury, do not
operate the unit while on a ladder or a roof.
• Keep hands, face, and feet away from all moving parts.
Do not touch or try to stop moving parts.
• Do not touch the engine or muffler. These parts get
extremely hot from operation, even after the unit is
turned off.
• Do not operate the unit faster than the speed needed to