14
Voice alarm (TABS Voice+ & Professional)
Your TABS Voice+ or Professional monitor
(Figure 9)
has audio
recording capability. You can record a message up to 10 seconds in
length.
To record a voice message:
1. Remove the battery cover.
2. Push down the black record button and hold it down until you are
finished recording. The light will be on during this time indicating
the monitor is recording
(Figure 9)
.
3. Hold the monitor 8" - 12" from your mouth and record your
message. Speak slowly and enunciate your words.
4. Replace the battery cover.
5. When finished recording, review your message by pulling the disk
from the disk slot. Your message should be easily understood and
heard. If it is not, re-record by following Steps 1 through 3.
light
Speaker Rocker switch
Black
record
button
Battery compartment
Figure 9
