A word about Dual Lock
®
fastener
According to the manufacturer, if Dual Lock
®
fastener is used properly it can withstand up
to 1,000 closures before replacement is
necessary. Inspect each piece of Dual Lock
®
fastener regularly and replace each piece at
the first sign of wear.
A piece of film covers the adhesive on the
back of each piece of Dual Lock
®
fastener
(Figures 2 and 3)
. The adhesive is very
strong – it was manufactured for one mount
only so never reuse a piece of Dual Lock
®
fastener. If you remove a piece of Dual Lock
®
fastener from the mounting surface or
bracket, replace it with a new piece of Dual
Lock
®
fastener.
To remove Dual Lock
®
fastener:
The adhesive on Dual Lock
®
fastener bonds well enough to the
mounting surface that there is a possibility it may damage your wall
when you remove it. Gently grab a corner of the fastener and ease your
fingers under it. Roll the Dual Lock
®
fastener slowly off the mounting
surface.
Wheelchair and door applications
Your TABS
®
mobility monitor can also be used to monitor a person in a
wheelchair or to monitor an interior door. Contact your TABS
Representative to obtain the Wheelchair Bracket Assembly (Model
25100) or Easy-Clip Wheel Chair Bracket (Model 25300) or the Door
Mount Kit (Model 24010).
Connecting optional plug-in power supply for the TABS Professional
Insert plug-in power supply into power supply jack on left side of unit
(Figure 4a)
. The red indicator light on the front of the case will be on
when the unit is connected to the plug-in power supply.
protective
film (remove)
Dual Lock fastener
Figure 2
Figure 3
8
