Senergy 16KTL-DL3, Руководство пользователя

Страница: 26 / 50

23
Step 3 Loosen the four screws lock on AC OUTPUT door, and connect L1, L2, L3, N and PE
through AC OUTPUT terminal cover to the terminal block, use a screw driver to tighten screws
to a torque of 3N·m , as shown in Figure 5.6.
Step 4 Lock the AC OUTPUT terminal shell back to the original position, Stretch all the lines on
the AC end naturally and then tighten the plug , as shown in Figure 5.7.
L1 L1 L2 L2 L3 L3 N N PE PE
L1 L 2 L 3 N
P E
L1 L1 L2 L2 L3 L3 N N PE PE
L1 L 2 L 3 N
P E
Figure 5.6 Tighten AC wire
Figure 5.7 Tightening the wiring board
L1 L 2 L 3 N P E