Menu outputs and sockets
50
Submenu Operating Time
With the operation time you specify when the control is active.
Operating Time
Start time
Stop time
Days
For example, by selecting a time from 7:00 start time to 19:00 stop time, you can prevent
activation at night. If both times are set to 0:00 the control is continuously active.
The time function can be used to change the control time continuously by an adjustable
value per day (see daylight mode).
The submenu days offers the possibility to do the function only on specific weekdays.
Submenu Alarm Handling
In this sub-menu, you define whether the output should be switched off or on in case of
an alarm.
Alarm Handling
Switch off output
Switch on output
This function allows countermeasures to be taken in the event of an alarm, such as
switching on additional ventilation or forwarding the alarm to a telecommunications
system.
