Registration for push message
27
Registration for push messages
In order for warnings, notes and alarms to be received as push messages, the respective
terminal device (smartphone) must be registered with the control unit. This requires an
existing WLAN connection, the installed SENECT Control App and the integration of the
control into the SENECT Control App (see chapter WLAN). Registration can be performed
in the app in the menu (gearwheel symbol in the top right-hand corner) under "Alarm
Settings". To do this, enter a freely selectable name for "Mobile X" (e.g. User 1) and
confirm this with +. With the button "Test Mobile" you can check the registration.
The same applies to the email addresses that should receive an alarm message.
The registration must always be done directly with the respective end
device. Entering the phone number of the respective device does not work.
