ENGLISH 8/8
MI001515-E
DECOMISSIONING AND DISPOSAL
Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other European
countries with separate collections programs). This symbol, found on your producr or on its packaging, indicates
that this product should not be treated as household waste when you wish to dispose of it. Instead, it should be
handed over to an applicable collection point for the recycling of electrical & electronic equipment. By ensuring this
product is didposed of correctly, you will help prevent potential negative consequences to the environment and
human health, which could otherwise be caused by inappropriate disposal of this product. The recycling of
materials will help to conserve natural resources. For more detailed information about the recycling of the product,
please contact your local city office, waste disposal service of the retail store where you purchased this product.
Variations of standard parameters are possible by EASY SETUP software (please see:
www.seneca.it download area).
For more information about a list of all register and their function Pease see:
USER manual.
FACTORY SETTINGS
All DIP-switch OFF
:
- MODBUS Protocol Communication parameters: 38400 8,N,1 Addr. 1
- Filter active on the 24 Digital inputs and Filter value = 100Hz
All dip switch OFF except
and
SW2 (ON)
SW4 (ON)
- CANopen Protocol / Communication parameters: 20K Addr. 127
- Filter active on the 24 Digital inputs / Filter value = 100Hz
LED RUN (Green)
STATE
CANopen state LED meaning
Single flash
Stop
The Device is in STOPPED state.
Blinking
Pre-
operational
The Device is in the PRE-OPERATIONAL state.
ON
Operational
The Device is in the OPERATIONAL state.
LED RUN (Green)
ModBus state LED meaning
ON
The device is transmitting.
LED FAIL and PWR: General System Diagnostics
LED PWR (Green) Meaning
ON
Power Supply Presence
LED FAIL (Yellow) Meaning
ON
RS232 port (COM) data reception.
LED 01 24: Digital Inputs State
–
LED 1 24 (Green)
–
Meaning
ON
01 08
–
: If counters are enabled: the correspondent counter is ON.
Otherwise it signals the state of the correspondent digital input.
09 24
–
: The correspondent generic digital input is ON.
