ENGLISH - 8/8
MI004531-I
Code
Description
Z-UMTS
HSPA+ unit with RTU
multiprotocol datalogger.
Z-PC-DINAL1-35
DIN rail support with screw terminals P= 35 mm.
Z-PC-DIN1-35
DIN rail with one slot support for rear connector P= 35 mm.
A-GSM
External GSM antenna dual band adhesive, cable 3,2 m.
FD01
Photodetector for pulse counter, MAX frequency 10 Hz.
ORDER CODES
DIP-SWITCHES
SW1
All the DIP-Switches to OFF
position.
For further informations please refer to: USER MANUAL
SW2
RS232 or RS485 configuration
on terminals 10-11-12 (serial port COM 2)
RS232
ON
RS485
OFF
CONFIGURATIONS
DI4
DI3
DI2
DI1
DO2
DO1
485
ACT
19 20 21
22 23 24
USB
10 11 12
13 14 15
16 17 18
1
2
4
5
6
S
SENECA
3
ETH
LNK
ETH
ACT
SD
PWR
ETHERNET
ANTENNA
Z-UMTS
S
SENECA
ETH
USB
The module has a RJ45 socket on frontal panel.
Note: Inserting the RJ45 10/100 Base T Ethernet plug make sure that the
connector is securely latched, or before inserting the cable into the RJ45
connector, move the protective rubber. The picture shows how to Insert the
RJ45 connector.
For further information, refer to the
USER MANUAL.
The module has a serial USB micro port on the lower side.
The picture shows how to Insert the micro USB plug into the micro USB
side socket. For further information, refer to the USER MANUAL.
RJ45 ETHERNET AND USB CONNECTIONS
Inserting the SIM card
into the frontal slot.
If the SIM card is properly
inserted then protrudes
from the frontal panel of
about 4.5mm.
Inserting the MicroSD or
the microSHDC, into the
side slot. Max 32 GB.
Push-push connector
for insertion and
removal.
SIM-CARD AND SD-CARD INSERTING
Technical support
Product Informations
CONTACTS
