MI002191-I-E
MI002191-I-E
ENGLISH 8/8
Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other European
countries with separate collections programs). This symbol, found on your producr or on its packaging, indicates that
this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed
over to an applicable collection point for the recycling of electrical & electronic equipment. By ensuring this product is
didposed of correctly, you will help prevent potential negative consequences to the environment and human health,
which could otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about the recycling of the product, please contact your
local city office, waste disposal service of the retail store where you purchased this product.
9.0 SIGNALLING LEDS
LED
STATE
MEANING
Run
Slow blink
The Z107E work properly
Fast blink
«BOOT» mode enable
Act
On
No data transfer from Ethernet
Blinking
Data on Ethernet OK
Lnk
On
Connection OK
Off
Ethernet not connected
10.0 ACCESSORIES
CODE
DESCRIPTION
Z-PC-DIN
AL1-35
DIN rail support with screw terminals P=35 mm
AL2-17,5
DIN rail support with screw terminals P=17,5 mm
Z-PC-DIN
1-35
DIN 1 slot support for rear connector P=35 mm
2-17,5
DIN 2 slot support for rear connector P=17,5 mm
4-35
DIN 4 slot support for rear connector P=35 mm
8-17,5
DIN 8 slot support for rear connector P=17,5 mm
PM001450
Ethernet cable 1,5 m
PM002490
RS232 cable (DB9M-DB9F), pin to pin
8.4 Description
The following diagrams shows some examples of applications for different operating
modes of the Z107E, in particular:
Application example 1: REMOTE COM PORT, allows to create a remote communication
via ethernet by creating a virtual serial COM port for
or
bus.
Application example 2 : TUNNEL POINT TO POINT, ethernet communication
repeater between two Z107E.
Application example 3 : TUNNEL POINT to MULTIPOINT; allows the connection between
more Z107E.
RS485
RS232