MI00146 -E
2
ENGLISH - 3/8
SETTINGS BY INTERNAL JUMPERS AND TRIMMERS
Some jumpers and two trimmers are present on the board and allow to define some
custumized settings for the instrument.
To set the jumpers it is necessary to open the indicator from the rear side by applying
leverage using a screwdriver on the lateral joints and so draw the board.
The position of the internal jumpers within the board is illustrated on the below figure:
Setting of the View Scale
To set the
o
display view, work on the jumper
:
scale f instantaneous
P5
- closed: full-scale of display 0..1000.
- opened: full-scale of display 1000..1999.
Short circuit between the terminals 1 and 6:
- rotate the knob fully counterclockwise corresponding to the 0 mA and regulate the
trimmer
up to obtain the desidered indication.
TR2
- rotate the knob fully clockwise corresponding to the 20 mA and regulate the trimmer
TR1
up to obtain the desidered indication.
TR1 TR2
P5
P18
P15
P14
P16
