COMPATABILITY:
SINGLE TABLETOP MODE:
IN SINGLE MODE THE PROGRESSION TABLETOP WILL FIT BETWEEN ALL OF OUR RAMPS (CLASSIC / CORE /
PROGRESSION) AT THE SAME / FIXED HEIGHT
RAMP TO RAMP AT SAME HEIGHT - NO LEGS ARE NEEDED
RAMP TO DROP OFF OR CASE PAD – 1 x LEG MATCHING RAMP HEIGHT IS REQUIRED
DOUBLE TABLETOP MODE:
IN DOUBLE MODE THE PROGRESSION TABLETOP WILL FIT BETWEEN ALL OF OUR RAMPS (CLASSIC / CORE /
PROGRESSION) WITH THE LEG SETS THAT CORRESPOND TO THE RAMP HEIGHT
RAMP TO RAMP AT SAME HEIGHT – 2 FIXED LEG SETS MATCHING RAMP HEIGHT PLUS 1 PAIR JOINING BLOCKS
RAMP TO DROP OFF OR CASE PAD – 2 FIXED LEG SETS MATCHING RAMP HEIGHT PLUS 1 PAIR JOINING BLOCKS
FULL PROGRESSION MODE WITH ADJUSTABLE LEGS:
THE PROGRESSION TABLETOPS CAN BE USED WITH PROGRESSION RANGE RAMPS WITH THE ADJUSTABLE LEG AND
DROP OF COMPONENTS AT ANY HEIGHT FROM 350 TO 600. THE ADJUSTABLE LEGS ALSO WORK WITH THE
PROGRESSION TABLETOPS ON THE CLASSIC AND CORE RANGE BUT ONLY AT FIXED HEIGHTS.
TERRAIN ADJUSTMENT
:
Sender features are best used on grass but can be used on tar or concrete. However, the severity of landing and risk factor will
greatly increase on hard surfaces. There is a small amount of terrain adjustment in the legs to level your ramp.
SAFETY FEATURE:
The front edge of our ramps have 2 x PEG POINTS so you secure the ramp on grass or gravel. Normal Tent pegs will considerably
increase stability and removed movement. These may help when using a Tabletop attached to the ramps.
SUITABLE FOR SKATEBOARDS and SCOOTERS
Progression ramps and Tabletops can be used with Skateboards and Scooters with the OPTIONAL Skate Plate installed. This
Galvanised plate can be retro fitted. Once installed it can be adjusted and placed in transport / storage mode