SENDER RAMPS PRO CORE SKILLS TRAINER Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 16

SENDER RAMPS PRO CORE SKILLS TRAINER Скачать руководство пользователя страница 1

SENDER PRO CORE SKILLS TRAINER

Thanks for buying our PRO trainer. Front wheel lift is an essential core bike handling skill for ascending, descending, jumping,
bunny hop, drop offs and of course manuals. Used in combination with rolling practice the trainer is a powerful tool that will
help you build confidence and allow you to practice holding the bike at the balance point using weight shift.

What’s NEW!

A massive step forward with no more spacers. We have designed and refined a model which has full mechanical advantages.
You can now micro adjust the width AND clamp the rear wheel with relative ease. Still super strong materials and Stainless Steel
fixings for durability. The sides flex to support the wheel whilst reducing high dynamic loads on all wheel types. The large
platforms are strong to provide lots of lateral support and a solid stable landing surface when you dismount.

Designed for:



Suitable for riders, clubs and coaches - Heavy use including E Bikes.



Fits 20 Inch to 29 Inch Wheels.



**Any Tyre width from 0 to 80 mm Wide – Please NOTE! Below 21 mm you will need to buy shorter bolts from SENDER.



Will fit 16 Inch Wheels with the Special Adapter



Can be used with Resistance Bands (NOT INCLUDED) for strength and conditioning

* It is possible to tighten the 80 / 100 mm bolts so the gap is completely closed. However, the end of the thread will penetrate
beyond the side panel safety blocks and become dangerous! Tyres less than 21 mm require shorter bolts from Sender.

Safe Use:

1
2
3
...
»

Содержание PRO CORE SKILLS TRAINER

















Отзывы:

Нет отзывов