10
Doc# 2016-25-05 Rev F Technical Support 678-208-3087 Ext #1 Airtext Installation Manual
Recommended Crimp Tools
Wire Gauge
Hand Crimping Tool
20-24 AWG
Positioner
Insertion Extraction Tool
Military P/N
M22520/2-01
M22520/2-09
M81969/1-04
Positronic
9507
9502-4
M81969/1-04
Amp
601966-1
601966-6
91067-1
Daniels
AFM8
K42
DAK95-22MB/ DRK95-22MB
Astro
615717
615725
M81969/1-04
NOTE
Non-Send Solutions part numbers shown are not maintained by Send Solutions and are subject to change
without notice.
Cabling and Wiring
Wiring should be installed in accordance with AC 43.13-1B Chapter 11. When wire separation cannot be
achieved, the following issues should be addressed:
• The cable harness should not be located near flight control cables, high electrical capacity lines, or fuel
lines.
• The cable harness should be located in a protected area of the aircraft.
• Do not route cable near high-energy sources.
See the interconnection diagrams in Figure 2 for the appropriate wiring. Once the cable assemblies have
been made, attach the cable connector. Route the wiring bundle as appropriate. Avoid sharp bends.
For Airtext, use 22 AWG or 20 AWG wire for all connections including power/ground.
CAUTION
Check wiring connections for errors before connecting the 25-pin D-sub to Airtext. Incorrect wiring could
cause component damage.
