Page | 28
Modulation
Standard
The detected modulation standard can be S, S2 or S2x
Constellation
The detected symbol constellation, signaled in the PLHEADER for S2/S2x.
Code Rate
The detected FEC code rate, signaled in the PLHEADER for S2/S2x.
Frame length
The size of the FEC frame. Not applicable for DVB-S.
Roll-off
The detected roll-off of the SRRC filter, signaled in the BBHEADER for
S2/S2x.
Pilots
The detected pilot configuration, signaled in the PLHEADER for S2/S2x.
Input power
The power level of the transponder.
CNR
Carrier to noise ratio.
EbN0
Information bit energy to noise ratio.
PER/BER
DVB-S:
Bit error rate during the last X bits.
DVB-S2(x):
TS Packet error rate during the last X TS packets
Carrier Offset
The offset of the input carrier frequency to the configured frequency.
Symbol Rate
Offset
The offset of the input symbol rate to the configured symbol rate.
Spectrum
Inverted or normal.
6.2.2 Component status
The lower section of the status pane shows detailed MPEG TS status. The PID view lists the components signalled in the
PMT, not the PIDs detected on the input. I.e. if there are any unreferenced PIDs these will not be listed. Signalled PIDs
that are not present will generate a PID missing alarm.
