Sencore DMG 4000 Скачать руководство пользователя страница 12

Страница: 12 / 75

Page | 12

•

Engineer

: As Engineer, but not allowed to add and remove flows in the system, only to change the content.

•

Operator

: View only rights.

To add a new user, press the + sign in the desired profile and add the credentials.

3.4

“Maintenance Center” Application

The Maintenance Centre application provides the toolkit for doing maintenance of the unit. The maintenance centre is a
global application interacting with all modules in the unit.

•

Upgrade modules with new software

Please see the Upgrade Guide document for further information.

3.5 Interface Configuration

3.5.1 IP Interface Application

The IP interfaces application manages the IP interfaces of a module.

Open the IP interface application for the respective slot. For a switch card the control port will be listed in addition to the
data ports.

Содержание DMG 4000











































































Результаты поиска

Содержание DMG 4000

Отзывы:

Бренды по названию

Популярные бренды

Sencore DMG 4000, Руководство пользователя

Результаты поиска

Содержание DMG 4000

Отзывы:

Бренды по названию

Популярные бренды