04/2017
- 3 -
Copyright © 2017, Fast ČR, a.s.
■
Make sure that no hair, clothing or other items enter the feed tube of meat grinder
while it is running. Do not put anything other than the ingredients that are to be
processed into the feed tube.
■
Never use your fingers or other items to push ingredients through the meat grinder
feed tube. For this purpose there is a pusher included as an accessory.
Warning:
Incorrect use may lead to injuries.
■
To prevent injury caused by sharp edges, be especially careful when handling
the grinding blade of the meat grinder and the blade assembly of the blender.
Increased attention must also be paid when emptying out the blending jar, when
removing the grinding blade from the chamber, and when cleaning the appliance.
■
Do not attempt to grind bones, frozen meat or other hard ingredients.
■
Hot liquids up to a temperature of 80 °C may be processed in the blending jar. Be
especially careful when handling hot liquids. Hot steam or splashing hot foods and
liquids may cause scalding. Never start the blender without the lid properly seated
in position. When processing hot liquids, do not remove the inner cap during
operation. Do not touch the hot surface. Use the handle to carry the blending jar
when it is hot.
■
The maximum continuous operating time is 10 minutes. Do not exceed the
maximum operating time of 5 minutes when in the kneading mode and do not
exceed the maximum operating time of 3 minutes when using the blender. Before
starting it again, allow the appliance to cool down for 30 minutes.
■
Always turn off the appliance, disconnect it from the power socket when
not be using it, when leaving it without supervision, and before assembling,
disassembling, cleaning or moving it. Prior to disassembling the appliance and
replacing accessories or accessible parts that move during use, wait until all
moving parts come to a stop.
■
Clean it according to the instructions in chapter Cleaning and maintenance.
■
Never wash the appliance under running water or submerge it in water or another
liquid.
■
Do not turn on the appliance when it is empty. Incorrect use of the appliance may
negatively affect its lifetime.
■
Ensure that the power plug contacts do not come into contact with water or
moisture. Do not place heavy items on the power cord. Make sure that the power
cord does not hang over the edge of a table or that it is not touching a hot surface.
■
Disconnect the power cord from the power socket by pulling on the plug, never
pulling on the cord. Otherwise, this could damage the power cord or the socket.
■
If the power cord is damaged, have it replaced at a professional service centre. It is
forbidden to use the appliance if it has a damaged power cord.
