Sencor SSK 160, Руководство пользователя

Страница: 10 / 64

EN - 8
Situation 2:
1. If the inner diameter of the waste bin is larger than 27.5 cm, pull off the extendable rail 4 to
a suitable length and then place the paper shredder on the waste bin with both hands.
2. Ensure that the shredder is seated firmly on the waste bin (see fig. C ).
3. Connect the power plug
1
to a properly installed socket with a protective conductor
(AC 220-240 V; 50 Hz = house connection).
Using the AUTO setting
You can shred your paper with the Auto setting.
1. Place the slide switch
5
at the AUTO position. The LED ready indicator
6
comes on green and
the paper shredder is ready for use.
2. Feed the paper through the feed-in slot for paper
2
into the cutters. Make sure that you push
in the paper straight and centred. If the slide switch is at AUTO , the paper shredder switches off
automatically as soon as the paper has been shredded.
3. Place the slide switch at OFF if you no longer need the paper shredder. The LED ready indicator
goes out.
4. Disconnect the power plug
1
and empty the waste bin.
There is a paper sensor
3
in the centre of the feed-in slot for paper
2
. It detects the paper
inserted and activates the cutters in the paper shredder. For this reason, always push
smaller paper formats into the centre of the slot.
Using the REV setting
Use the REV setting to put the cutters into reverse operating direction.
1. Move the slide switch
5
to the REV position. The cutters run in reverse and move the fed paper
back out of the shredder.
2. Take the paper out of the shredder in order to continue with the shredding process (see “paper
jam” in the fault table).
Cleaning
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Disconnect the power plug before cleaning.
− Never submerge the paper shredder in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk of damage!
Improper handling of the paper shredder may result in damage to the paper shredder.
− Do not use any aggressive cleaners, brushes with metal or nylon bristles, sharp or metallic
cleaning utensils such as knives, metal sponges and the like. They could damage the surfaces.
− Use a damp cloth to wipe off the paper shredder. Let all parts dry completely afterwards.
The paper shredder is maintenance-free and the cutting mechanism need not be treated
with special oil.