Sencor SSK 160, Руководство пользователя

Страница: 9 / 64

EN - 7
First use
Checking the paper shredder and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp knife or other pointed objects, you
may easily damage the paper shredder.
− For this reason, be very careful when opening the packaging.
1. Take the paper shredder out of the packaging and check whether the paper shredder or individual
parts exhibit damages. If this is the case, do not use the paper shredder. Contact the manufacturer
using the service address specified on the warranty card.
2. Check to make sure that all contents have been received (see page 5 ).
Operation
NOTICE!
Risk of damage!
Incorrect handling of the paper shredder may damage the motor or the inner rollers.
− Avoid overloading the motor by not putting more than 6 sheets of paper (80 g/m²) into the slot at
the same time.
− Do not shred formats larger than A4 or continuous paper.
− Unplug the device if the motor cuts out because of overloading. Ensure that the slide switch is
at OFF. Leave the motor to cool for about 30 minutes to room temperature, before you plug the
shredder back in. You can then continue with operations.
− Remove paper clips, staples and similar fixings before you start shredding.
Short-term operation:
• The shredder is suitable only for short-term operation and not for continuous use. After
continuous operation of a maximum of 1 minute, let the shredder rest for 30 minutes, to
prevent overheating of the device.
• The shredder motor switches off automatically if it overheats.
Placing on a waste bin
The paper shredder comes with a paper bin 7 . Place the paper shredder directly on the paper bin
and ensure that the paper shredder is seated firmly on it (see fig A).
Alternatively, use a round waste bin with a diameter of between 27.5 cm and 37.5 cm. To ensure
proper operation, place the paper shredder with both hands on the ring surface or the edge of the
waste bin.
You can adapt the paper shredder to ensure that it fits well on the waste bin.
Situation 1:
1. If the inner diameter of the waste bin is around 27.5 cm, you can directly put the paper shredder
on the waste bin without using the extendable rail
4
.
2. Ensure that the shredder is seated firmly on the waste bin ( see fig. B ).
3. Connect the power plug
1
to a properly installed socket with a protective conductor
(AC 220-240 V; 50 Hz = house connection).