5
DRY IRONING
To iron without steam, follow the instructions in section “steam ironing”, but leave the steam selector (3) at position
“0”
.
Spray Function
Make sure that there is water in the reservoir. Press the spray button (5) slowly (for a dense spray) or quickly (for a vaporized
spray)
[Fig. 6]
.
Warning:
For delicate fabrics, we recommend moistening the fabric beforehand using the spray function (5), or putting
a damp cloth between the iron and the fabric. To avoid staining, do not use the spray on silk or synthetic fabrics.
CLEANING
Please note: Before cleaning the iron in any way, make sure that the appliance plug is not connected to the socket.
Any deposits, starch residue or size left on the plate can be removed using a damp cloth or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.
SELF-CLEANING
The self-cleaning feature cleans inside the plate, removing impurities. We recommend using it every 10-15days. Directions:
• Make sure that the supply cable is disconnected from the wall outlet
• Fill the reservoir up to the maximum level indicated and set the steam selector
• Connect the supply cable to the wall outlet
• Set the thermostat knob (13) to the maximum temperature and wait for the light (12) to turn off .
• Pull the plug out of the socket and hold the iron horizontally over the sink.
• Hold the cleanout button (14) setting until all the boiling water, steam, impurities come out
[Fig. 7]
.
• When the soleplate has cooled down, you can clean it with a damp cloth.
HOW TO PUT IT AWAY
• Disconnect the plug of the iron from the socket.
• Empty the reservoir by turning the iron upside down and gently shaking it.
• Leave the iron to cool down completely.
• Roll up the power cord with the rewinder
[Fig. 8]
.
• Always put the iron away in a vertical position.
Steam Iron
SSI 8406
EN
2b
2a
OPEN
CLOSE
3
4
