- 8 -
05/2020
Copyright © 2020, Fast ČR, a.s.
TECHNICAL SPECIFICATIONS
Toothbrush
Battery ...........................................................................................Li-Ion / 3.7 V / 800 mAh
Operating time when fully charged .............................................up to 180 minutes
Noise level ............................................................................................................... 65 dB(A)
Protection class level against damaging entry of water .................................. IPX7
Charging stand
Input ....................................................................................100−240 V~, 50-60 Hz, 1.4 W
Electrical shock protection class ......................................................................................II
Protection class level against damaging entry of water .................................. IPX7
The declared noise emission level is 65 dB(A), which represents a level A of
sound power with respect to a reference sound power of 1 pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty
insulation.
Protection class level against damaging entry of water:
IPX7 – The appliance is protected against damaging entry of water when
submerged at a depth of 1 metre for 30 minutes.
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your
municipality.
REMOVING THE BATTERY AT THE END OF THE
PRODUCT'S LIFETIME
Prior to disposing of the product or handing it over at a specialised collection
facility, it is necessary to ensure that the built-in battery is removed. Allow
the battery to discharge before removing it. To remove the battery, proceed
as follows. Wrap the toothbrush handle
A2
into an unneeded piece of cloth
and place it on an even, stable surface. Using a small hammer, hit the handle
from the side a few times in the vicinity of the LED indicator
A4
. Rotate the
handle
A2
and repeat this procedure until the bottom cover is released from
the handle
A2
. After releasing the cover, remove it and take out the built-in
battery. Battery removal may also be performed at an authorised service
centre. In the event that the product has been disassembled for the purpose
of ecological disposal then it must not be reassembled.
BATTERY DISPOSAL
The battery contains environmentally damaging substances
and therefore does not belong in standard household waste.
Hand it over for proper disposal at respective collection
locations.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that
used electric or electronic products must not be added to
ordinary municipal waste. For proper disposal, renewal and
recycling hand over these appliances to determined
collection points. Alternatively, in some European Union
states or other European countries you may return your
appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources and
prevents potential negative effects on the environment and human health,
which could result from improper waste disposal. Ask your local authorities
or collection facility for more details.
In accordance with national regulations penalties may be imposed for the
incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or
supplier for the necessary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this
product, request the necessary information about the correct disposal
method from the local council or from your retailer.
This product meets all the basic requirements of EU directives
related to it.
