2
Food chopper
SHB 4320
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabi-
lities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children should be supervised to ensure that they will not play
with the appliance.
• The blades are very sharp! Handle with care.
• Before you plug the appliance into a socket, check whether the voltage in your home corresponds to the rating label of
the appliance.
• Always unplug the appliance before assembling, disassembling, cleaning or storing.
• Do not let the power unit, cord or plug get wet.
• Never use a damaged appliance, if it has been damaged, please get it to approved service centre checked or repaired.
• Do not let excess cord hang over the edge of a table or worktop or touch hot surfaces.
• Remove the knife blade before emptying the bowl.
• Do not plug the appliance into the power supply until it is fully assembled and always unplug before disassembling the
appliance or handling the knife blade.
• The appliance is constructed to process normal household quantities.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualifi ed person
in order to avoid a hazard.
• Switch off the appliance before changing accessories or approaching parts which move in use.
Important
• Do not run the food chopper continuously for longer than 30 seconds, leave it to cool for 2 minutes in between each
30 seconds operation.
• Never operate the food chopper with the bowl fi lled with liquid.
• Do not use small “S” blade chop hard foods, such as coff ee beans, ice cubes, nutmeg, spices or chocolate.
Description:
A. Switch cover
B. Housing
C. Cover
D. Small blade
E. Chopping bowl
F. Skid proof mat
G. Blending pole
How to use the food chopper
Chopping
• Carefully remove the plastic cover from the blade.
Caution: The blade is very sharp! Always hold it by the upper plastic.
• Place the blade in the centre pin of the chopping bowl.
• Add your food. See processing guide.
• Put the cover on the chopping bowl.
• Inset the motor part into the cover.
• Plug in. Press down on the switch cover for short lengths of time to produce a pulsing action—this will avoid over pro-
cessing the ingredients.
• After use, unplug, then remove the motor part and the cover.
• Carefully take out the blade.
• Remove the processed food from the chopping bowl.
EN
B
C
D
E
F
G
A
