Sencor SDV 7406H, Руководство пользователя

Страница: 19 / 146

EN 17
EN
Revision 05/2015 Copyright © 2015, Fast ČR, a. s.
System setup
BRIGHTNESS, CONTRAST
Select one of the items, use the arrow buttons [

]/[

] to set the value and then confi rm
with [ENTER].
6.4.4. HDMI SETUP
HDMI
You can enable or disable the HDMI output.
6.4.5. AUDIO SOURCE (AUDIO)
HDMI audio can be set automatically according to the disc (AUTO) or forced by selecting
PCM linear audio (provided it is included on the disc).
6.5. PRE-SET PAGE
This item is available when there is not disc in the compartment, the compartment is
open or the disc in the compartment is stopped.
6.5.1. TV TYPE
This product supports NTSC (National Television System Committee) and PAL (Phase
Alternating Line) television broadcasting standards.
PAL: Select this mode if the connected TV uses the PAL system. The video signal of an
NTSC disc will be transmitted in PAL format.
AUTO: Select this mode if the connected TV uses multiple systems. The video signal
output format will correspond with the disc video signal.
NTSC: Select this mode if the connected TV uses the NTSC system. The video signal of
an PAL disc will be transmitted in NTSC format.
Note:
If the setup is incorrect, the picture quality will be of very low quality. In such cases,
adjust the settings for this item to eliminate the error.
6.5.2. AUDIO, SUBTITLES and DISC MENU
Select the desired language for audio, subtitles and disc menu under these items.
The audio language selection can also be set by pressing [AUDIO] and the subtitle
language can be set by pressing [SUBTITLE] on the remote controller.
Note:
If the selected language for the current disc being played is not available, the default
disc settings will remain selected.
SDV 7406H Sencor EN CZ SK HU PL.indb 17 5.5.2015 11:00:40