Sencon SI9000 plus, Руководство пользователя

Страница: 31 / 45

ENAMEL RATER MANUAL: V.10 31
6.3.2 THE TANDY DMP132 PRINTER
This printer utilises a 4 pin DIN style connector for its serial
interface (Radio Shack Cat No. 274-007). Wire connection is;
PIN SENCON CABLE
COLOUR
EPSON PIN
1 BLUE 3
2 RED 4
3 YELLOW 2
6.3.3 USING OTHER PRINTERS
If a different printer is used the connector type and pin numbers will
be given in the printer user manual. Having obtained the correct
connector it will be necessary to connect to it as follows;
SI900+
PIN
COLOUR PRINTER CONNECTION
1 BLUE Signal Ground or OV. Not to be confused with screen or
protective ground which may be a different pin.
2 RED TxD or Transmit Data. This is the wire that carries the data
signal with respect to OV out of the .
3 YELLOW CTS or clear to send. This signal is generated by the printer
and is used to stop and start the flow of data from the .
It must be connected otherwise it will stop data transmission.