5
A handset can direct the base station to forward all future phone calls to another
handset or another phone number:
¾
Step 1: press “menu” key; then press “5” to enter the “settings” mode
¾
Step 2: press “3” to turn on the call forwarding function
¾
Step 3: use up/ down arrow key to view all options from “off”, “another handset”,
and “external line.” Make your selection then press “save” to confirm your
choice. The pre-setting in the factory is “off.”
¾
Step 4: A warning message “all calls are forwarded” will appear on the handset
LCD.
¾
Step 5: To cancel the call forwarding, repeat the procedure as above and select
“off.”
#4.34 Voice mail
SR-436S offers the built-in voice mail system which allows people to leave voice
message if you were not able to answer the call at that moment.
¾
Step 1: press “MENU” and follow by pressing number “4” to enter the voice
mail mode
¾
Step 2: enter the number of the mailbox (which equal to your handset ID) and
your password. The default password is “0000”. You can change the password
later on.
¾
Step 3: once the valid mailbox number and password being entered, you will see
the number of new voice messages and old voice messages shown upon the LCD
display
¾
Step 4: Follow the voice prompt to play new messages, old messages, or change
mailbox settings
¾
Step 5: After playing a message, handset can follow the voice prompt to replay
current message, play the next message, play the previous message, delete the
current message, or transfer (not copying) the current message to another
handset.
You can access the voice mail outside the system by calling the base unit. As soon as
you hear the main greeting message, you can enter the “*” key twice promptly to
enter the voice mail mode. Once you successfully key-in the voice mail number and
password, you can access the voice mail remotely!
