4
Section 4.3: Set up and basic operation
#4.31 handset registration
SR-436S can accommodate up to 90 users within the system, which means up to 90
handsets can be registered to the single base unit. Handset packaged along with the
system is pre-registered in the factory with handset ID as “10”. It’s pretty easy to
register additional handsets into the system by following the instruction:
¾
Step 1: press handset menu key, then press number “6” to enter the handset
registration mode
¾
Step 2: press and hold the base’s registration (REG) button for 2 seconds until
the L1, L2, L3, and L4 LED light up.
¾
Step 3: press hardest key “1” to complete the registration process. The base unit
will assign the 2-digit handset ID (between 11 and 99) to handset user. The
assigned ID will be displayed on handset’s LCD, representing the successful
registration. Please refer to the advanced registration section if you want to
obtain a specific handset ID.
¾
Step 4: you can follow the same process to register extra handsets
#4.32 call transfer~ #4.33 call forwarding
To make a phone call, just press “TALK”, wait for the dial tone, and then enter phone
number. Press “END” once you finish the phone conversation. To make an intercom
call, press “2-WAY” key followed by the two-digit handset ID to establish the internal
communication. Press “END” once you finish the conversation.
Besides basic phone operation, SR-436S can perform some typical functions offered
by the PBX system such as call transfer, call forwarding, and 3-way conferencing.
Here are the operation guidelines:
While a telephone call is in progress, you can place the call on hold and transfer the
call:
¾
Step 1: press “Hold” using the right soft key
¾
Step 2: press “option” using the right soft key again to enter the menu selection
¾
Step 3: press number “2” and enter the two-digit handset ID to call another
handset extension such as “12”
¾
Step 4: you can perform either “unannounced” call transfer by pressing “end”
before the destination handset answers or “announced” call transfer by talking to
another handset user first then press “end” to discontinue the communication.
