~15~
b. Adjust receiver voice volume when in the Talk mode.
c. Press
to adjust ringer volume when in the Standby mode.
d. Press
to enter phonebook when in the Standby mode.
9.
END; On/Off Key (
)
a. Ends a call.
b. Leaves current menu operation, up one level.
c. Press for 3 second
s
to turn off the handset.
10. CALLER ID Key (
)
a. Review caller ID list.
b. Including received and missed caller ID.
Additional Handset Features
1. Multiple handsets registration
a. Up to 9 handsets can be registered to a base station
b. ID 11-19: individual Handset IDs.
c.
ID 91-99: Group IDs. Handsets can “subscribe” from the handset menu to
group(s) and be paged when an intercom caller enters a Group ID.
2. Ringer Vibrator
a. Two options for Line (incoming call) ringing & Intercom ringing.
b. Six-level ringer volume selections (Off/Low/Medium/High/Vibrate/ Vibrate
& High) for each option.
c.
Eight ringer type selections for each option.
3. Caller ID
Displays incoming call phone number and name on the LCD (needs Caller ID
service from local telephone company or PBX/Key phone system analog port).
4. Call waiting with caller ID
Displays 2
nd
incoming call information on the same phone line when 1
st
call is in
progress (needs Call Waiting with Caller ID service from local telephone
company or PBX/Key phone system analog port).
5. Name tagging with caller ID
Match the caller ID with the phone book entries; once matched, the LCD screen
will display the name or nickname instead of pure caller ID info (needs Call
Waiting with Caller ID service from local telephone company or PBX/Key phone
system analog port).
~16~
6. DND (Do Not Disturb, i.e., Silent Ring)
7. Call Logs
a. Redial: Stores 10 phone numbers (up to 26 digits each) dialed most
recently. Can perform last-number redial on all 10 numbers.
b. Received & New Call Log: Total 50 entries (16-digit phone number, 16-
character names, and Date/Time stamp), needs Caller ID service from local
telephone company.
c.
Phone numbers and names can be saved into phonebook while in display.
8. Call Barring: Block outgoing calls and incoming calls.
a. Outgoing call:
a-1. Block the users from dialing long distance calls or international calls
a-2. Up to 5 digits of each call barring setting; up to 5 entries allowed.
b. Incoming call:
b-1. PA On/Off: Enable or disable the broadcast from other handsets or
base station. When PA is Off, the handset can’t receive broadcast from
base station or other registered handsets, but it can broadcast to base
station or other registered handsets.
b-2. Line On/Off: Enable or disable the capability to receive incoming call
from telephone line. When Line is Off, the handset can’t receive incoming
call from telephone line, but it can still make outgoing call.
b-3. Int. On/Off: Enable or disable the intercom from other handsets or
base station. When Int. is Off, the handset can’t receive intercom from base
station or other registered handsets, but it can intercom to base station or
other registered handsets.
c.
This changing requires to entering the “Call Settings” (
MENU
-4-3).
[Note] You need to key in the accurate user ID and password to perform this
feature. The default password is 0000.
9.
Any Key Answer (except
and
SILENT
Soft Key)
10. Key-guard
a. When the keyguard is selected, all keys will be locked.
Press
UNLOCK
(Left) soft key followed by
＊
to release it.
b. The keyguard will be automatically enabled once returning back to idle
mode for 15 seconds.
