36
B.3.27. AT+BTNAME=$string
SD Response
OK
Purpose
Change device name
Parameters
$string
= New device name (Default=
”
PSDv3b-445566
”
)
Description
Parani-SD can have a user friendly name to identify easily. The name allows 30 alpha-
numeric characters maximum.
Reference
AT+BTINFO?, AT+BTINQ?
Example
AT+BTNAME=
”
My-Parani-SD
”
B.3.28. AT+BTLPM,n
SD Response
OK
Purpose
Set low power mode
Parameters
n=0: Inactivate (Default)
n=1: Activate
Description
During no data transmission, Parani-SD can be in low power mode to save the power
consumption. It takes a few seconds to wake up Parani-SD in low power mode.
B.3.29. AT+DFU
SD Response
(Display garbage messages repeatedly)
Purpose
Device firmware update
Description
DO NOT use this command in console. Because the Parani-SD enter into firmware update
mode, garbage messages will appear. This command is used by ParaniWIN’s firmware
update menu.
B.3.30. AT&V
SD Response
S0:m0;S1:m1;
⋯
Sn:mn
OK
Purpose
Display all the S-register
Description
All parameters are stored at S-register in flash memory. These values are sustained until
hardware reset.
Reference
ATS
B.3.31. ATSnn?
SD Response
value
OK
