17
Figure 3-7 Device Setting Window
Parani-SD supports two security options, Authentication and Encryption. If you check the
Authentication option, you must also enter the Pin Code value. If the authentication is activated, the
connection, only between the Master and Slave device that share the same Pin Code, is established.
In case that Parani-SD connects to other Bluetooth device that enables authentication, you must know
the other device’s Pin Code. In general Bluetooth devices, 1234 or 0000 is used as a default value. If
you check Encryption option, the Parani-SD encrypts packets and sends them. The Encryption options
works well in case that only one between Master and Slave uses this option.
Parani-SD has 4 response messages, ‘OK’, ‘ERROR’, ‘CONNECT’, and ‘DISCONNECT’. In some
cases, these responses can affect the host system unexpectedly. To prevent this, user can set the
Command response to ON or OFF.
For Parani-SD100/200, hardware flow control can be configured only by dip switch. Thus H/W Flow
Control option will not work in this case.
When the dipswitch value isn’t ATcommand mode, the RS-232
menu will be disabled.
Click [Apply] button to reflect the given options to Parani-SD actually.
Connect(out) icon will show the following window to search and connect other Bluetooth devices.
