Sena Parani-SD 100, Руководство пользователя

Страница: 24 / 27

Parani-SD100 User Manual – Appendix A. AT Commands
A-4
6 AT+BTINFO?
SD Response 112233445566,DeviceName,Mode,Status,Auth,Encryp,FlowControl
OK
Purpose Display Bluetooth settings
Description The current Bluetooth settings are displayed including BD address, Device name,
Operation mode, Operation status, Authentication, Data Encryption, and Hardware
Flow Control. The initial value of Device name is
‘
PSDv3b-445566
’
. PSD stands for Parani-
SD100, v3b for the version of firmware, and 445566 for the last 6 digits of BD address.
Mode=MODE0/MODE1/MODE2/MODE3
Status=STANDBY/PENDING/CONNECT
Auth=0/1 (Authentication is not activated when 0)
Encrypt=0/1 (Encryption is not activated when 0)
FlowControl=HWFC/NoFC
Example 000B530011FF,SENA,MODE0,PENDING,1,1,HWFC
7 AT+BTINQ?
SD Response 112233445566,FriendlyName,CoD
112233445566,FriendlyName,CoD
112233445566,FriendlyName,CoD
OK
Purpose Search Bluetooth devices nearby
Description The Bluetooth devices in Inquiry scan mode nearby are displayed with their BD
addresses, Device names, and Class of device.
Maximum 10 devices are scanned for 30 seconds.
8 AT+BTLAST?
SD Response 112233445566
OK
Purpose Display the BD address of the last connected device
Description The Bluetooth device connected to this Parani-SD100 last time is displayed with its BD
address.
9 AT+BTMODE,n
SD Response
OK
Purpose Set operation mode
Parameters n=0: MODE0 (Default)
n=1: MODE1
n=2: MODE2
n=3: MODE3
Description
When the operation status is
‘
Pending
’
currently, change the status to
‘
Standby
’
with
AT+BTCANCEL prior to this command.
To take effect of this command, ATZ or power off and on.
Example AT+BTMODE,2
OK
ATZ