Sena 10s Скачать руководство пользователя

Страница: 50 / 58

10S

CERTIFICATION AND SAFETY APPROVALS

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device pursuant to part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment on and

off, the user is encouraged to try to correct the interference by one or

more of the following measures:
•

Reorient or relocate the receiving antennae

•

Increase the separation between the equipment and the receiver

•

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected

•

Consult the dealer or an experienced radio/TV technician for help

FCC RF Exposure Statement

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. End users must follow the specific

operating instructions for satisfying RF exposure compliance. The

antenna used for this transmitter must not transmit simultaneously with

any other antenna or transmitter, except in accordance with FCC multi-

transmitter product procedures.

FCC Caution

Any changes or modifications to the equipment not expressly approved

by the party responsible for compliance could void user’s authority to

operate the equipment.

Содержание 10s



























































Результаты поиска

Содержание 10s

Отзывы:

Похожие инструкции для 10s

Бренды по названию

Популярные бренды

Sena 10s, Руководство пользователя

Результаты поиска

Содержание 10s

Отзывы:

Похожие инструкции для 10s

Бренды по названию

Популярные бренды