Sena 10s страница 53 Скачать руководство пользователя

Страница: 53 / 58

10S

English

•

When using the product, be certain to conform to laws regarding the

use of communications devices while riding.

•

Do not put the product where it may hamper the rider's vision or

manipulate it while riding. This may cause traffic accidents.

•

Before riding, fasten the product to the helmet, and double-check

that it is fastened. Separation of the product while riding may cause

damage to the product or accidents.

•

If the product is damaged, stop using it immediately. It may cause

damage, explosion, or fire.

Battery

This product has an irreplaceable rechargeable battery inside.

Therefore, when using the product, make sure to adhere to the

following:
•

Never separate the battery from the product as this may damage the

product.

•

The battery performance may be reduced over time with usage.

•

In recharging the battery, make sure to use an approved charger

provided by the manufacturer. Use of a non-approved charger may

cause fire, explosion, leakage, and other hazards may also reduce

the life time or performance of the battery.

•

Any 3rd party USB charger can be used with Sena products if the

charger is approved by either the FCC, CE, IC or other locally

approved agencies that Sena accepts.

•

Do not use cigarette chargers other than the included cigarette

charger to charge the headset.

• Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher

or lower temperatures may reduce the capacity and life of the

battery, or may cause temporary non-operation. Do not use the

product in sub-zero temperature, because it may cause serious

reduction of the battery performance.

• If you apply heat to the battery or throw it into fire, it may explode.
•

Do not use the product with a damaged battery. It may explode and/

or cause accidents.

•

Never use a damaged charger. It may explode and/or cause

accidents.

•

Battery life may vary depending on conditions, environmental

factors, functions of the product in use, and devices used with it.

Содержание 10s



























































Результаты поиска

Содержание 10s

Отзывы:

Похожие инструкции для 10s

Бренды по названию

Популярные бренды

Sena 10s, Руководство пользователя

Результаты поиска

Содержание 10s

Отзывы:

Похожие инструкции для 10s

Бренды по названию

Популярные бренды