User Guide
Rev 2.0
www.semtech.com
21 of 27
TSDMTX-19V3-EVM
May-18
Semtech
D.
Board Layout
The diagram below shows the locations of the components used in the TSDMTX-19V3-EVM PCB.
E.
Board Layers
The TSDMTX-19V3-EVM PCB is based on a four layer design as shown below. The ground plane in layer two is
recommended to reduce noise and signal crosstalk. All components are placed on the top of the board for easier
evaluation of the system. End product versions of this design can be made significantly smaller by distributing
components on both sides of the board. The Gerber files for this artwork can be downloaded from the Semtech
web page.
