background image

 

10 

MAINTENANCE 

 
 
 
 

 
 
Clearing A Jam 

 
With the machine off and the power cord unplugged, reach in and remove any jammed 
banknotes if they are visible from either the top area of the machine near the feed rollers or the 
bottom area of the machine near the stacker.  If the obstruction is not visible, the operator can cut 
a bill-sized piece from a file folder and use the feed rollers  to manually roll it through the 
machine (with the power off) in order to push the obstruction to a point where it is visible and 
within reach.  If this does not work, please contact your authorized Semacon service provider. 

 

 
 
  

 

 
 
 
Cleaning 

 

In order to properly maintain your counter, it should be cleaned on a regular basis.  We suggest 
regularly blowing  any dust out of the counter with a can of compressed air  which  can be 
purchased at most office supply stores.   We also recommend placing the  dust cover  over the 
machine when it is not in use and the power is off. 
  
Depending on your usage level, your counter should be professionally cleaned and serviced 
periodically  by your authorized Semacon distributor or it can be sent to the Semacon Service 
Center for a general preventative cleaning & maintenance service.  Contact your distributor to 
determine the proper location for service.

 

WARNING:  

Never place your fingers inside the machine during operation.

 

WARNING:  

Always switch off the power and unplug the power cord when cleaning 

the machine or before attempting to clear a jam. 

 

WARNING:  

Do not use any wet cleaning cards in the machine.  

 

Содержание S-1600 Series


















Отзывы: